Home Breakcrum Wireless Video Quad Processor & Receiver

Wireless Video Quad Processor & Receiver

Be the first to review this product

Availability: In stock


Quick Overview

This is a Wireless Video Quad Receiver which allows for 4 Wireless cameras to be simultaneously viewed on the one monitor.  Please note that we may need to supply the Wireless Cameras for this unit unless you can change the frequencies on the camera transmitters to match the receivers.  In most cases its a simple matter of tuning the cameras and/or recevier to accommodate all. 

A quad recevier allows for all cameras to viewed simultaneously and each camera view can be made full screen or sequentially switched between all cameras.

Wireless Video Quad Processor & Receiver

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


This excellent product combines four 2.4GHz receivers with a Quad Processor all in one neat system box!
So you can view the images from multiple (4 maximum) 2.4GHz cameras on a single TV simultaneously in four way split screen mode. The unit also allows you to jump to full screen mode on any one channel or, alternatively one can switch automatically from camera to camera and into Quad screen at pre-set intervals

The Quad Receiver also has a standard 2.4GHz SMA antenna fitting so you can try to increase wireless range by adding a higher gain antenna. As always, wireless ranges can and do vary greatly depending upon site conditions. Obstructions such as walls, trees etc not to mention other wireless devices can all have a bearing on quality and general interference and must be taken into consideration. The more wireless signals in any one location, the more chance of some interference or transmission range problems.

Wireless receiving 4-Channel Multiplexer, 4 cameras receiving by switch in quad image in one screen
Time and date display and location set-up
Camera name setup
Auto sequence
Camera picture quality set-up
Monitoring 4 x electronic zoom function

System: PAL/NTSC
Receiving Frequency: CHl: 2414MHz,CH2: 2432MHz CH3: 2450MHz,CH4: 2468MHz
Power Supply: 12V 1.2A
Current Consumption: 700mA
Receiving Sensitivity: -88dBm
Antenna Input Impedance: 75 ohm
Video Output Level: lVp-p
Audio Output Level: lVp-p
Image Resolution: 720X76(PAL) 720X80(NTSC)
Image Refresh Rate: 60Hz/second (NTSC) 50Hz/second (PAL)
Video Output Type Single picture, two picture, PIP, POP or four
Picture can be displayed and switched automatically
Ambient Temperature -30 ~ +60 degree

Packing list
4-Channel Multiplexer
Power supply      
A/V output line     
User Manual
Remote control
2.4GHz antenna

Additional Information

Manufacturer No
By Order No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.