Home Breakcrum Wireless Gate Alert Standard Gate Alarm Four Zone Receiver

Wireless Gate Alert Standard Gate Alarm Four Zone Receiver

Be the first to review this product

Availability: In stock

$815.00
OR

Quick Overview

Wireless Gate Alert Standard Gate Alarm perfect as a standard gate alarm for rural and commercial sites or across wider areas protecting Fuel Tanks or damp buildings such as Sheds, Garages etc.

Four Zone Base Receiver Options:
• 1 – 4 zones Monitoring System (e.g.: one to four entrance-ways)
• 800m Range (300 – 400m typical)
• Perfect for rural and commercial installations
• 3 Year Warranty, including Batteries

Wireless Gate Alert Standard Gate Alarm Four Zone Receiver

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Wireless Gate Alert Standard Gate Alarm Four Zone Receiver

Wireless Gate Alert Standard is a high performance wireless Standard Gate Alarm system, this system sounds an alert in your home if a visitor drives or walks through its detection beam. Using a proper photo-electric beam, it makes more immune to false alarms than PIR based systems.  Never miss a customer or intruder again.

The Wireless Gate Alert Standard Alarm is designed to operate in sub-zero temperatures as reliably as the penetrating heat of the Australian outback. This standard alarm is hand assembled in New Zealand.

The beam-set may be installed as a home ‘driveway alarm’ or across wider areas protecting Fuel Tanks or damp buildings such as Sheds, Garages etc.

The detection beam can span up to 40m of open ground. The Standard Gate Alarm operating range from the Beam-set to Base Receiver is typically between 300-500m.  Range is affected by obstacles, and can extend as far as 1km in perfect conditions, or be limited to 200m if needed.

Check our Wireless Gate Alert Extended if you require our best range gate alarm, or the  Wireless Gate Alert Lite if you require a residential gate alarm.

Two-way Radio Supervision and On-board Diagnostics (displayed on Base Receiver) are features alarm installers routinely expect on wireless equipment – this unique feature we never seen in other gate alert yet.

Wireless Gate Alert Lite Driveway Alarm is compatible with our Pocket Beeper*, POCSAG Pager*, Text Message Module* and easily interfaces with Alarm Panels.

(* optional extras, sold separately).

Base Receiver:

Whenever any enrolled beam-set beam is interrupted the Gate Alert 700-WGA receiver sounds an alarm. The alarm sound is different for each activated Beam-set(s) or zone.

The Two-zone Receiver has a fixed volume control. Other devices (or an alarm panel) interface with the Base Receiver via terminal blocks located on the back of the enclosure. Beam-set battery connector Located next to these terminal blocks. In the event a battery from the Beam-set needs to be re-charged quickly, it can be plugged into this battery connector.  N.B Batteries should normally not require charging, if any low battery warning are being experienced, please check your solar panels for any cable faults, positioning or soiling first then contact us for further assistance.

The Four-zone Receiver has adjustable volume and tone, as well as the ability to mute volumes and switch off output connections.

Each Base Receiver comes with its own antenna and is powered with a supplied 12V AC adaptor.

LITE BEAM-SET:

The Gate Alert 700-WGA Standard Beam-set is designed to monitor driveways or open ground with its precise invisible infra-red beam.

The beam-set is made up of two small Beam Units, installed directly opposite each other.  An infra-red beam is transmitted from one and received by the other. Whenever the beam is broken, one Beam Unit sends an RF signal to the Base Receiver, alerting to the arrival of a person or vehicle.

The Beam-set is powered by internal rechargeable batteries which are kept charged via small mountable solar panels.

SOLAR PANELS:

The Beam-sets are comes with two solar panels. These solar panels are designed to keep the batteries charged.

Our solar panels have been treated, specifically, to withstand salt spray and harsh UV rays which New Zealand experiences due to the depletion of the ozone layer.

Specifications:

Two Zone Base Receiver:

  • Two-way Radio Supervision: YES
  • On-board Diagnostics: YES
  • Maximum Number of Supported Beam-Sets: 2
  • Volume Adjustment Increments: NONE – Fixed Volume
  • Power Requirements: 12V DC
  • Dimensions – Millimeters: W65 | L100 | H30
  • Warranty: 3 Years

Four Zone Base Receiver

  • Two-way Radio Supervision: YES
  • On-board Diagnostics: YES
  • Maximum Number of Supported Beam-Sets: 4
  • Volume Adjustment Increments: Yes – 4 Volume levels
  • Power Requirements: 12V DC
  • Dimensions – Millimeters: W75 | L119 | H30
  • Warranty: 3 Years

Beam Set

  • Type of Beam: Active Photo-electric Infra-red
  • Maximum Beam Width: 40m
  • Maximum Operating Range between Beam-set and Base Receiver: 800m
  • Modulation Type: Gaussian Frequency Shift Keying (GFSK)
  • Radio Frequency: 458.550 MHz Band (Country Specific)
  • RF Output Power: 80 mW
  • Average Power Consumption per Beam Unit: 10 mW
  • Battery Voltage: 3.6V (charges to 4.2V approx.)
  • Weather Resistance: Poly-Carbonate, IP66 rated Enclosure, Fully weather-proof, Ant-proof
  • Dimensions – Millimetres: W48 | D45 | H60
  • Warranty: 3 Years

Solar Panels

  • Voltage Output: 7.0Voc
  • Dimensions – Millimetres: W120 | D60
  • Warranty: 3 Years

Product Accessories

  • 1 700-WGA Two or Four zone base Receiver
  • 700-WGA Standard Beam-set(s)
  • Solar Panel for each Beam Unit
  • Rechargeable Batteries
  • 12V AC Adaptor
  • Mounting Brackets

 

Additional Information

Manufacturer No
By Order No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.