Product Description
This excellent product combines four 2.4GHz receivers with a Quad Processor all in one neat system box!
So you can view the images from multiple (4 maximum) 2.4GHz cameras on a single TV simultaneously in four way split screen mode. The unit also allows you to jump to full screen mode on any one channel or, alternatively one can switch automatically from camera to camera and into Quad screen at pre-set intervals
The Quad Receiver also has a standard 2.4GHz SMA antenna fitting so you can try to increase wireless range by adding a higher gain antenna. As always, wireless ranges can and do vary greatly depending upon site conditions. Obstructions such as walls, trees etc not to mention other wireless devices can all have a bearing on quality and general interference and must be taken into consideration. The more wireless signals in any one location, the more chance of some interference or transmission range problems.
Features:
Wireless receiving 4-Channel Multiplexer, 4 cameras receiving by switch in quad image in one screen
Time and date display and location set-up
Camera name setup
Auto sequence
Camera picture quality set-up
Monitoring 4 x electronic zoom function
Specifications
System: PAL/NTSC
Receiving Frequency: CHl: 2414MHz,CH2: 2432MHz CH3: 2450MHz,CH4: 2468MHz
Power Supply: 12V 1.2A
Current Consumption: 700mA
Receiving Sensitivity: -88dBm
Antenna Input Impedance: 75 ohm
Video Output Level: lVp-p
Audio Output Level: lVp-p
Image Resolution: 720X76(PAL) 720X80(NTSC)
Image Refresh Rate: 60Hz/second (NTSC) 50Hz/second (PAL)
Video Output Type Single picture, two picture, PIP, POP or four
Picture can be displayed and switched automatically
Ambient Temperature -30 ~ +60 degree
Packing list
4-Channel Multiplexer
Power supply
A/V output line
User Manual
Remote control
2.4GHz antenna
Additional Information
| Manufacturer | No |
|---|
